 |
| Gator™ Traditional Series 4x2 Utility Vehicles : Specifications |
|
|
|
|
|
|
|  |
|  |
| MANUFACTURER |
John Deere |
John Deere |
| MODEL |
Gator™ TX |
Gator™ TX
Turf |
| Engine and Electrical |
|
|
| Make |
KHI |
Kawasaki |
| Type |
4-cycle petrol |
4 cycle
petrol |
| Cylinders |
1 |
1 |
| Cooling |
Air |
Air |
| Valving |
Overhead valves |
Overhead
valves |
| Displacement |
401 cc |
401 cc |
| Ignition |
Magneto, solid state 12V |
Solid State
12V |
| Lubrication |
Full pressure |
Full
pressure |
| Oil Filter |
Screw on filter |
Spin-on |
| RPM, idle (no load) |
1125 +/-75 |
N/A |
| RPM, fast (no load) |
3750 +/-75 |
2800 engine
rpm @ governed speed |
| Air Cleaner |
Dry
replaceable single element w/intake |
| Battery |
38 amp/hr,
340 cca |
38 amp/hr,
340 cca |
| External Starter Generator |
--- |
30 amp @
governed speed |
| Alternator |
16.6 amp
regulated |
--- |
| Headlights |
Two 37.5
watt halogens |
Two 37.5
watt halogen |
| Muffler |
Spark
arresting |
High volume |
| Brakes |
|
|
| Type |
All-wheel
hydraulic disc |
| Park Brake |
Rear
mechanical disk (hand-operated) |
| Tyres |
|
|
| Front |
Two
22x9.50-10, 4 PR, |
Two
22x9.50-10, 4PR |
| Rear |
Two
24x10.50-10 HPAP, 24x12-10 Turf/Hard Surface & HPAT |
Two
24x12-10, 4PR |
| Available tread types |
High Performance All Purpose, Turf/Hard Surface, High Performance All Terrain, & Run Flats |
Turf/Hard
Surface |
| Weight |
|
|
| Including fuel/fluids |
468 kg |
468 kg |
| Dimensions |
|
|
| Seating Capacity |
2 |
2 |
| Seat Type |
Professional
High back, bucket (tilt forward) |
| Seat adjustment |
Optional,
driver's side |
Optional |
| Height |
1,108
mm |
1,209 mm |
| Width |
1,525
mm |
1,525 mm |
| Length |
--- |
--- |
| Without Bumper |
2,681 mm |
2,681 mm |
| With Bumper |
2,746 mm |
2,746 mm |
| Ground Clearance |
--- |
--- |
| Under Transaxle |
145 mm |
145 mm |
| Under Foot
Platform |
270 mm |
270 mm |
| Front Tread Centres |
1,270 mm |
1,270 mm |
| Rear Tread Centres |
1,219.3 mm |
1,219.3 mm |
| Wheelbase |
1,841 mm |
1,841 mm |
| Turning Clearance Circle |
6.9 m |
6.9 m |
| Payload Capacity |
454 kg |
454 kg |
| Towing Capacity |
454 kg |
454 kg |
| Cargo Box |
|
|
| Length |
1,115 mm |
1,115 mm |
| Width |
1,245 mm
inside |
1,245 mm
inside |
| Depth |
229 mm |
229 mm |
| Capacity |
272 kg |
272 kg |
| Volume |
0.32 m3 |
0.32 m3 |
| Height above ground |
737 mm |
737 mm |
| Material |
16 gauge
steel |
Rolled
formed steel |
| Dump |
--- |
Manual,
power lift (optional) |
| Tailgate |
Hinged at
bottom, removable |
Hinged at
bottom, removable |
| Fuel System |
|
|
| Capacity |
20 L |
20 L |
| Consumption (approx.) |
|
--- |
| At Half Load and
Average Speed |
1.32 l/h |
1.32 l/h |
| Suspension and Steering |
|
|
| Front |
Independent,
spring over shock, single A-Arm |
Independent,
spring over shock, single A-Arm |
| Total travel |
127 mm |
127 mm |
| Rear |
Parabolic
spring w/shock absorbers |
Parabolic
spring w/shock absorbers |
| Total travel |
63.5 mm |
65 mm |
| Steering |
Rack and
pinion |
Rack and
pinion |
| Transmission |
|
|
| Type |
Continuously
variable transmission (CVT) |
| Speed |
0-32 km/h
forward,
0-31.2 km/h reverse |
0-25 km/h
forward,
0-24.1 km/h reverse |
| Drive belt |
Spun top
cog, 31.6 mm wide |
Spun top
cog, 31.6 mm wide |
| Overall Reduction Ratio |
--- |
--- |
| Low |
17.79:1 Trans. forward |
17.79:1 Trans. forward |
| High |
18.34:1 Trans. reverse |
18.34:1 Trans. reverse |
| Bearings |
Sealed
bearings throughout |
Sealed
bearings throughout |
| Axle |
33.5 mm
diameter forged, splined shaft |
| Differential Lock |
Standard;
hand-operated |
N/A |
| Drive Chain |
N/A |
N/A |
| Transaxle |
Fully
enclosed; oil bath |
Fully
enclosed, oil bath |
| Gear Selection |
Forward,
neutral, reverse |
Forward,
neutral, reverse |
| Ground Pressure |
|
|
| With 91 kg Operator Only |
6.2 psi
(0.44 kg/cm2) front, 11.6 psi (.82 kg/cm2) rear |
| Machine |
|
|
| Other standard features |
Two cup
holders, glove box, hour meter, fuel gauge, 12V DC outlet |
Two cup
holders, glove box, hour meter, fuel gauge, 12V DC outlet, neutral interlock
(service) |
| Fender and hood material |
--- |
TPO -
Thermal Plastic Olifen (rubber and polypropylene) |
| Notes |
|
|
| Disclaimers |
*Engine hp
is provided by engine mfr. for comparison purposes. Actual operating hp will
be less. |
* Specifications subject to change.
Please contact your local dealer for more detailed information.
|
| |
|
|
