| MANUFACTURER |
John Deere |
| MODEL |
110 TLB |
| Tractor Unit |
|
| Engine |
--- |
| Type |
Diesel,
Direct Injection |
| Manufacturer/Model |
Yanmar/TNV88 |
| Gross Eng. Power
@ Rated Speed |
32.1 kW
(43.0 hp) @ 2600 |
| Net Eng. @ Rated
Speed |
30.6 kW
(41.0 hp) @ 2600 |
| PTO Output Power
@ Engine Speed |
24.6 kW
(33.0 hp) @ 2600 |
| Hydraulic Power |
23.1 kW
(30.9 hp) |
| Cylinders |
4 Cylinders |
| Total
Displacement |
2.2 litres |
| Fuel
consumption, 75% load |
7.5
litres/hour |
| Restart |
Auto-bleed |
| Cold Start
Assist |
Air Preheat
Coil |
| Rated Speed |
2600 RPM |
| Electrical |
--- |
| Volts/Alternator |
12V/40 Amp
Standard, 55 Amp Optional |
| Battery |
650 CCA |
| Alternator
Amperes |
40 Standard;
55 Optional |
| Starter Size |
2.0 kW (2.7
hp) |
| Hydraulics |
--- |
| Type |
Open Center |
| Number of Pumps |
3 |
| Total Flow |
89.2 l/m |
| System Pressure |
3000 psi
(20,684 kPa) |
| Hydraulic Flow
to Loader |
46.1 l/m |
| Hydraulic Flow
to Backhoe |
61.5 l/m |
| Oil Cooler |
Steel, Thick
Core, 123,024 sq. mm |
| Capacities |
--- |
| Fuel Tank |
58 litres |
| Crankcase with
Filter |
4.9 litres |
| Cooling System |
9 litres |
| Transmission and
Hydraulic System |
57 litres |
| Transmission
Case and Filter |
37 litres |
| Transmission and
Hydraulic Oil |
HyGard J20C
or HyGard J20D Cold Service |
| Front Axle
Gearcase (MFWD axle) |
4.9 litres |
| Steering |
--- |
| Type |
Hydrostatic
Power |
| Turn Angle |
58 Degrees |
| Turns
Lock-to-Lock |
--- |
| Brakes |
--- |
| Type |
Wet Disk,
Inboard |
| Actuation |
Mechanical |
| Parking Brake |
Automotive
Style Lever |
| Turning Brakes |
Individual |
| Rear Power Take Off |
--- |
| Type |
Fully
Independent |
| Speed |
540 @ 2,600
Engine RPM |
| PTO Engagement |
Solenoid
Operated Clutch |
| PTO Clutch |
Wet,
Multi-Disk |
| PTO Brake |
Wet,
Multi-Disk |
| Tyres |
--- |
| Front |
10x16.5, 8
PR |
| Rear |
17.5Lx24, 8
PR |
| Tread Pattern |
Industrial
(R4) Standard;
Turf (R3) Optional |
| Rear Hitch |
--- |
| 3-Point Hitch |
Category I
Standard; Field Installed Optional |
| Control Type |
Position
only |
| Lift Capacity @
610 mm behind lift point |
1,134 kg |
| Drawbar Hitch |
Field
Installed Optional |
| Operator Station |
--- |
| Steering |
Non-Tilt |
| Direction
Control |
Dual Foot
Pedal |
| Instrumentation |
Right Side
Console |
| Seat Conversion |
Roll Over |
| Canopy |
Curved
Polyethelyne |
| Rollover
Protective Structure |
4-Post, SAE
J1040 to 4,082 kg. |
| Falling Object
Protective Structure |
Canopy
Sheet, ISO 3449 Level 1 |
| Standard
Lighting |
2 55 Watt
Canopy Mounted |
| Warning Lights |
Canopy
Mounted |
| Stop/Brake
Lights |
Rear, Canopy
Mounted |
| Transmission
Presence Safety System |
Yes |
| PTO Presence
Safety System |
Yes |
| Backhoe Presence
System |
Yes |
| Loader Unit |
|
| Model |
John Deere |
| Design |
--- |
| Type |
Closed Box
Construction Style Lift Arms |
| SCV Control |
Single Lever
Tractor Mount |
| Boom Control
Valve System |
Series Type |
| Masts |
Ductile Cast
Iron, Z-Form Webbing |
| Boom Bushings |
Replaceable |
| Pin Service |
End-Of-Pin
Greasing |
| Bucket
Anti-Roll-Back Device |
Mechanical |
| Auxiliary Front
Hydraulics |
Optional
Factory Installed |
| Bucket
Quik-Coupler |
Standard |
| Bucket Mounting
Plates |
Skid Steer
Loader |
| Bucket Mounting
Plate Area |
174,193 m2 |
| Standard Bucket
Width |
1,829 mm |
| Anti-Rollback
Devise |
Mechanical |
| Dimensions |
--- |
| Lift Height to
Pivot Pin |
2,917 mm |
| Reach at Max.
Lift Height |
--- |
| Max. Dump and
Rollback Angle |
--- |
| Performance |
--- |
| Lift Cap. to Max
Height/Pivot Pins |
1,237 kg |
| Lift Cap. to
Max. Height |
926 kg |
| Breakout Force @
Pivot Pins |
--- |
| Backhoe Unit |
|
| Model |
John Deere |
| Design |
--- |
| Construction |
Boxed
Construction from High Strength, Low Alloy Steel, Robotically Welded |
| Backhoe Controls |
Two Lever,
Direct Linkage |
| Boom Type |
Curved,
Fully Closed |
| Swing Frame |
Cast Iron |
| Boom and Crowd
Cylinder Mounting |
In-Line,
Pinned |
| Swing Cylinder
Mounting |
Cast in
Trunions, Cast-Iron Mounting |
| Cylinder Rod
Plating |
Nickel
Chrome |
| Cylinder Rod
Harness |
HRC58 |
| Cylinder Rod End
Attachment |
Friction
Welded |
| Stabiliser Feet |
Cast Iron,
Reversible |
| Aux. Hyd. Opt.
(7th Function Valve) |
Factory
Installed |
| Bucket Linkage |
John Deere
Power Link with Guide Link |
| Swing Lock
Mechanism |
Lift Pin |
| Boom Lock
Mechanism |
Lever
Actuated Hook, Rubber Cushioned |
| Stabiliser Angle
Rearward |
18 Degree |
| Bucket Couplers
Available |
Std. Pin
on/Opt. Mech. Coupler |
| Bucket Sizes
Available |
305, 406,
457, 508, 610, 762, 914 mm |
| |
(12, 16, 18,
20, 24, 30, 36 in.) |
| Dimensions |
--- |
| Max. Digging
Depth |
3,073 mm |
| Truck Loading
Height |
2,567 mm |
| Reach from Swing
Pivot |
4,016 mm |
| Boom Swing Arc |
180 Degree |
| Bucket Rotation
Arc |
190 Degree |
| Stabiliser
Spread-Oper. |
2,489 mm |
| Leveling Angle |
13 |
| Performance |
--- |
| Digging
Force-Crowd |
16.743 kN |
| Digging
Force-Bucket |
25.457 kN |
| Side Swing Force |
10.8 kN/m |
| Boom Lift
Capacity at Ground Level |
552 kg |
| Dipperstick Lift
Capacity at 2.4 m above ground |
680 kg |
| Overall Dimensions |
|
| Tractor Wheelbase |
1,815 mm |
| Transport Height-Backhoe Folded |
--- |
| Transport Length-Backhoe Folded |
--- |
| Transport Width-Incl. Front Bucket |
--- |
| Curb Turning Radius w/o Brakes |
3,568 mm |
| Curb Turning Radius w/Brakes |
3,150 mm |
| Bucket Clearance Circle w/o Brakes |
--- |
| Bucket Clearance Circle w/Brakes |
--- |
| Operating Weight w/Backhoe |
--- |
| Operating Weight w/Loader and Box Blade |
3,302 kg |
