| MANUFACTURER |
John Deere |
| MODEL |
1600 Series II Turbo WAM
Model Year 2007 |
| Engine |
|
| Manufacturer |
Yanmar |
| Model |
4TNV84T |
| Displacement |
1,995 cc |
| Bore and Stroke |
84 x 90 mm |
| Injection |
Direct |
| Starting Aid |
Air Heater |
| Cylinders |
4 |
| Cycle |
4 |
| Horsepower (net intermittent) |
41.2 kW
(55.3 hp) @ 3000 rpm (Per SAE J1349) |
| Horsepower (gross intermittent) |
42.7 kW
(57.3 hp) @ 3200 rpm (Per SAE J1995) |
| Rated Engine Speed |
3000 rpm |
| Operating Range |
1400-3200
rpm |
| Lubrication |
Pressurized |
| Oil Filter |
Spin-on |
| Cooling |
Liquid-cooled |
| Cooling System Capacity |
7.5 L |
| Crankcase Capacity |
5.8 L |
| Compression Ratio |
19:1 |
| Operating Torque (net continuous @
3000 rpm) |
131.5 Nm |
| Max Torque per SAE J1349 (net
continuous) |
159 Nm |
| Air Cleaner |
Dual
element, Dry type |
| Air Restriction Indicator |
Standard,
Progressive-type |
| Engine Shutoff |
Key |
| Radiator Location |
Rear
Mounted |
| Fuel System |
|
| Fuel Type |
Diesel |
| Fuel Transfer Pump |
Electric |
| Fuel Filter |
Replaceable,
Spin-on type |
| Water Separator |
Replaceable,
100 mesh element |
| Cold Start Device |
Increased
timing for better cold starting |
| Fuel Capacity |
83.3 L |
| Fuel Pump Type |
Mechanical |
| Fuel Neck Opening |
76 mm |
| Fuel Tank Location |
Left side
of the machine |
| Self-Bleeding |
No, not
needed due to electric feed pump |
| Fuel Consumption |
|
| Full Load |
12.7 L/h |
| One-Half Load |
7.31 L/h |
| Implement Lift |
|
| Type |
Hydraulic,
open centre |
| Lift Cylinders |
50 mm Bore |
| Pump |
Gear |
| Implement Relief |
|
| Electrical |
|
| Charging System |
Automotive
type |
| Alternator |
55 amp |
| Battery Voltage |
12 volt |
| Battery Cold Crank Amps |
650 |
| Starter Size |
2.5 kW |
| Hydraulic System |
|
| Traction Drive Pump |
49 cc
displacement, axial piston pump |
| Motor |
33 cc
displacement, axial piston pump |
| Type |
Closed
loop, hydrostatic |
| Steering Relief |
1200 psi |
| Implement Relief |
1600 psi |
| Hydraulic Reservoir Capacity |
53 L |
| Drivetrain |
|
| Transmission Type |
Hydrostatic |
| Transaxle Type |
Dual range |
| Transaxle |
Tuff
Torque, Kanzaki |
| 4 Wheel Drive |
On-demand
or full-time |
| 4 Wheel Drive Type |
Mechanical
rear wheel drive |
| Differential Lock |
Mechanical,
foot activated |
| Final Drive |
Planetary |
| Brakes |
|
| Type |
Internal
wet disk |
| Steering Brakes |
Standard |
| Parking Brakes |
Rachet
engagement |
| Travel Speed @ 3000 rpm |
|
| Low Forward Speed |
0 - 13.8
km/h |
| High Forward Speed |
0 - 23 km/h |
| Low Reverse Speed |
0 - 6.9
km/h |
| High Reverse Speed |
0 - 11.5
km/h |
| Sound Level (without cab) |
|
| With Deck |
93 dB(A) |
| Without Deck |
89 dB(A) |
| Frame |
|
| Frame Type |
Welded,
tubular steel |
| Thickness |
11 gauge
(2.9 mm) |
| Steering |
|
| Type |
Power,
hydrostatic |
| Tilt Steering Wheel |
Standard |
| Turns Lock-to-Lock |
2.5 |
| Turning Radius |
990 mm |
| Operator Station |
|
| Seat |
Adjustable,
deluxe, high back, standard armrests |
| Adjustment
Positions |
3 |
| Armrests |
Yes |
| Safety |
Safety
interlock and operator presence system |
| Tyres |
|
| Drive Tyres (front) |
26x12-12 |
| Pressure |
30 psi |
| Steering Tyres (rear) |
18x9.5-8 |
| Pressure |
28 psi |
| Tread |
Multi-trac |
| Ply Rating |
6 PR (both
steering and drive) |
| Dimensions |
|
| Length (with deck) |
3,350 mm |
| Wheel Base |
1,520 mm |
| Tread Width |
1,310 mm |
| Width with Decks Down |
3,400 mm |
| Height with ROPS |
1,950 mm |
| Transport Width |
2,130 mm |
| Ground Clearance |
165 mm |
| Uncut Circle of Grass w/o Brakes |
0 |
| Vehicle Weight |
Whole
machine: 1,792 kg |
| Machine Weight Without the Deck |
1,474 kg |
| ROPS |
|
| Type |
Standard
2-post with seat belt, meets OSHA standard |
| Controls |
|
| Throttle |
Hand |
| Forward/Reverse |
Two-Pedal |
| Mower Lift |
Three, 2-function switches |
| Park Brake |
Foot
pedal/disk |
| Indicator Lights |
Engine air heater, Oil pressure light, engine temperature light, fuel gauge |
| PTO Engagement |
Electric solenoid switch |
| Type |
Hydraulic, Independent |
| PTO Engagement/Disengagement |
Electric solenoid |
| Deck Drive Pump |
40 cc displacement, axial piston pump |
| Deck Motor |
41 cc displacement, gear motor |
| Type |
Hydraulic, open centre, closed loop |
| Circuit |
Series |
| Mower Decks |
|
| Deck Drive Type |
Hydraulic, closed-loop |
| Spindles |
25.4 mm diameter, heat treated |
| Spindle Bearings Greaseable |
Yes |
| Energy-Absorbing Wing Decks |
Yes |
| Deck Circuit |
Series |
| Blade Drive |
C-Section, V-belt |
| Cutting Widths |
3,250 mm, 2,390 mm, 1,570 mm |
| Centre Deck Cutting Width |
1,570 mm |
| Wing Deck Cutting Width |
1,070 mm |
| Transport Lock |
Standard |
| Discharge |
Rear |
| Deck Construction |
Fabricated |
| Deck Thickness |
7 gauge (4.5 mm) |
| Height-of-Cut Range |
25 - 139 mm |
| Wing Deck Float |
Contour following |
| Up (while
maintaining PTO engagement) |
45 degrees |
| Down (while
maintaining PTO engagement) |
20 degrees |
| Anti-Scalp Rollers |
|
| Type |
Pneumatic |
| Wing Deck Caster Wheels |
Four, 11x4-5 Pneumatic |
| Front Deck Caster Wheels |
Two, 11x4-5 Pneumatic |
| Blades |
|
| Total Mower Blades |
7, Three Centre, Two Each Side |
| Blade Length |
558 mm |
| Blade Width |
63 mm |
| Blade Thickness |
0.79 cm |
| Blade Tip Speed |
3,962 metres/min (13,000 ft/min) |
| Interchangeable Mower Blades
Between All Decks |
Yes |
