5020 Series Full Frame Tractors : Cab

The 5020 cab provides a comfortable working environment for long hours of operation in all conditions with low in- cab noise of 75 dB(A).

• Ergonomic operation - giving the operator a perfect balance close to hand for those regularly used controls.
• Visibility - All round 320 degrees of un-impaired vision from inside the cab ensures accurate tractor placement and best performance.
• A radio mount is provided in the right side panel of the cab roof, convenient for easy adjustment and tuning without obscuring the operator's line of vision.
• Two angled, roof-mounted speakers give optimum sound reproduction to the operator.
• Tiltable cab for service convenience.

Access to the cab is both safe and simple. The following features allow for a quick, sure-footed entry:

• Large access doors on both sides
• Long contour handrails
• Large, non-slip, footsteps
• Once inside the cab, the full width flat floor (Standard Cab) and compact front console presents a real "walk through" capability.
• The steering column automatically moves up and out of the drivers way when release lever is pulled up, to enable easy entry or exit.

Seats are ergonomically designed and covered in stylish, easy to clean cloth upholstery.

• Air Suspended Seat
• Basic Seat with air suspension
• Horizontal suspension
• Mechanical lumbar support
• Instructional Seat
• The comfortable, soft-moulded instructional seat, complete with backrest, is located to the left of the operator
• When not required, the seat can be simply folded away.

The spacious cab enables a good flow of ventilation air around the operator.

The 5020 air conditioning system is powerful enough to keep a comfortable in-cab temperature, whatever the environment outside the cab.

• The air filter is located in the roof of the cab, where it is easily reached. A quick release is provided by opening the filter by turning the 2 knobs.

• Front visibility is enhanced by mounting the exhaust on the right-hand front corner of the cab.
• The vertical exhaust is mounted on the right hand side of the engine hood and is available as an option.
• As an alternative option, the adjustable horizontal exhaust is positioned downwards to the right hand side below the cab.

• Roof mounted front and rear working lights
• Two floodlights provide daylight-like illumination to the front of the tractor and its immediate surroundings.
• The lights are adjustable, to eliminate 'lighting pockets.
• Two adjustable roof-mounted rear lights give unparalleled illumination to trailed or linkage mounted equipment.
• Optional Belt Line Headlight
• Wiring connections for beacon lights are included as standard with the 5020 Series cab.(Beacon lights are an option)

• Left and right hand external mirrors
• Internal mirror

• The new Digital instrument pod has two large analogue dials giving at-a-glance information on essential items
• In addition to the analogue ground speed and rpm dials, the digital LCD display shows:
• Hour meter
• Ground speed
• Fuel level (symbol and bar-graph)
• Engine coolant temperature (symbol and bar-graph)
• Rear PTO speed
• The instrument panel has a row of information and warning lights across the top to monitor all important tractor functions.
• Speed controls from the first and most frequently used component in the right hand console the speed selection lever is located in the prime ergonomic position close to the hand throttle all being in section one of the console.
• Implement controls, housed in the second section include 3 point hitch and SCV controls.
• Precise linear depth control can be obtained - the electro-hydraulic 3-point-hitch controller system features a rotary depth stop for quick and easy adjustment.
• Selective control levers - Each lever offers extend, neutral, retract, float, and detent positions.
• PTO Controls are included in the first section. Speed selection and engagement of the rear PTO can be controlled with ease from the driver's seat.
• The multi-disc PTO clutch is electro-hydraulically controlled and features electronic modulation for smooth, uniform engagement.

The Electronic Operator Assistant Package (HMS II) is available for 5020 Series tractors with PowrQuad Plus transmission.

This Option includes the HMS II switches and the Drive line control centre. When the Electronic Operator Assistant Package is ordered the Remote Control for PTO LH and RH is included.

This reduces the number of operations at each headland turn and thus is less tiring for the operator.

Functions included in the HMS II can be switched off at any time.

HMS II control of the following with the activating of the "Sequence" switch:

• MFWD - on/off,
• Differential lock - on/off
• Front and rear PTO - on/off
• Hitch - raise/lower
• Any combination of the above mentioned may be sequenced for maximum flexibility.