5025 Narrow Series Utility Tractors : Hydraulics

5025 Series Narrow Tractors feature an open-center hydraulic system plumbed identically on each tractor.

This system is essentially two pumps working together as one to provide a high flow rate of 73.4 l/min (19.4 gpm) for 5325N Tractors and 94.6 l/min (25 gpm) for 5425N and 5525N Tractors.

• Rear half of pump delivers 24.9 l/min (6.6 gpm) (22.3 l/min (5.9 gpm) for 5325N models) hydraulic flow to the steering circuit.
• Front half of pump supplies 63.6 l/min (18.4 gpm) (51.1 l/min (13.5 gpm) for 5325N models) of hydraulic flow to the selective control valve(s) and 3-point hitch functions.
• All open station PowrReverser™ transmission tractors come standard with a hydraulic oil cooler to handle increased powertrain and hydraulic requirements.
• All PowrReverser™ transmission cab tractors come standard with a combi-cooler with a condenser.

Increase profit by maintaining consistency pass-to-pass with the electrohydraulic three-point hitch.

The 5025 Series Narrow tractors' Category 2/1/1N universal three-point hitch adapts to a wide variety of implements.

Three-point hitch has plenty of lift capacity to handle heavy integral implements such as rippers and sprayers.

5025 Series Narrow tractors can be equipped with up to five economical and versatile spool-type selective control valves. A maximum of three rear SCVs and two mid SCV's can be field or factory installed to add versatility to the 5025 Series utility tractors.

• Field or factory install dual or triple rear hydraulics.
• All rear SCVs are lever-controlled.
• SCV and rockshaft valve can be adapted to provide live hydraulic power (power beyond) to equipment having an independent control valve.
• ISO (International Standards Organisation) push-pull couplers reduce the muscle required to switch implements.
• allowing the operator to effortlessly couple and uncouple hydraulic hoses from one implement to another.
• Customers can couple and uncouple under pressure.
• With Triple Rear Deluxe Valves, The first valve is equipped with flow control, allowing customers to run a hydraulic motor, like sprayers, so customers can save the expense of having to purchase additional kits.

• Dual mid-hydraulics can be field or factory installed.
• Ideal for loader operation with the conveniently mounted joystick control.
• Safety lockout feature guarantees the joystick will not respond when the lock is on, allowing the customer to securely move around the worksite with confidence that the material will stay in the bucket or pallet.