|
|
| |  | |
| Self Propelled Windrowers : Service |
|
|
|
|
|
|
Engines:
-
Most service points are on the left side of engine for operator convenience.
-
Air intake stack is located behind the cab, in cleaner air, for less maintenance to air cleaner
-
Parts commonality with other Deere machines.
Hydraulics:
-
The hydraulic cabinet makes servicing the hydraulic functions very easy.
-
''Spin-on'' type oil filters are used on the charge and return side of the hydraulic system to ensure a clean hydraulic supply.
-
Reservoir sight tube for a quick visual check of hydraulic oil level.
-
Air conditioner condenser and oil cooler assembly swing out for easy serviceability.
-
Rotary wand air screen door gives a clean flow of air to the radiator for positive cooling.
Electrics:
-
The electronic cabinet, located at the rear right-hand corner of the operator's cab, is accessible from ground level.
-
Convenient central location for circuit breakers, relays, and fuses.
-
Components are identified in a decal for easy service.
Platforms:
-
896-Knife Drive Gearbox. Oil dipstick enables easy checking of oil level.
-
Clean-out panels are located under each end of the platform and allow cleaning of trash and debris from under the ends of the lower auger.
-
The clean-out panels and centre deck sheets can also be removed during operation, allowing sand, trash and debris to fall out of the platform without affecting the crop flow.
-
994 Platform Cutterbar uses readily available Hy-Gard™ transmission and hydraulic oil.
-
Sight glass in each end of the cutterbar provides operator with a visual check to easily assure that there is oil in the cutterbar.
-
No tools are required for this operation.
* Specifications subject to change.
Please contact your local dealer for more detailed information.
|
|
|
|
|
