| MANUFACTURER |
John Deere |
John Deere |
| MODEL |
830 Mower Conditioner |
835 Mower Conditioner |
| Power Requirements |
|
|
| PTO Speed |
540 or 1000 |
1000 |
| HP 540 rpm PTO, hp (kw) |
70-81 hp (52-60 kw) |
--- |
| HP 1000 rpm 1-3/8 in. PTO, hp (kw) |
70-150 hp (52-112 kw) |
90-150 hp (67-112 kw) |
| HP 1000 rpm 1-3/4 in. PTO, hp (kw) |
--- |
--- |
| Powerline Type |
Double-telescoping grob spline (swivel is tube) |
Double-telescoping grob spline (swivel is tube) |
| Hydraulic Pressure Required |
2000 psi |
2000 psi |
| Cutterbar |
|
|
| Type |
John Deere |
John Deere |
| Cutting Width, ft.-in. (m) |
9 ft. 9 in. (3 m) |
11 ft. 6 in. (3.5 m) |
| Cutting Height, in. (mm) |
0.8 to 3.7 in. (20 to 95 mm) |
0.8 - 3.7 in. (20 to 95 mm) |
| Number of Disks |
6 |
7 |
| Number of Knives |
12 |
14 |
| Disk Speed, rpm |
2650 rpm |
2650 rpm |
| Knife Tip Speed, mph |
191 |
191 mph |
| Disk Drive |
Gear |
Gear |
| Lubrication |
Hy-Gard oil |
Hy-Guard oil |
| Oil Reservoir Capacity |
7.4 qts. (7 L) |
8.5 qt. (8 L). |
| Cutterbar Oil Check |
Combination check/Drain plug |
Combination check/Drain plug |
| Cutterbar Angle |
Adjustable |
Adjustable |
| Angle Adjustment |
Mechanical-standard |
Mechanical |
| Angle Range |
--- |
--- |
| Cutterbar Protection |
Shearhub |
Shear hub |
| Adjustable Gauge Shoes |
Yes |
Yes |
| Conditioner |
|
|
| Impeller |
--- |
--- |
| Width, in. (mm) |
73 (1854) |
92.7 (2355) |
| Diameter, in. (mm) |
23.5 (597) |
23.5 (597) |
| Number of V-tines |
45 |
57 |
| Number of Speeds |
2 |
2 |
| Drive |
3-V powerband belt and sheaves |
3-V powerband belt and sheaves |
| Conditioner Hood |
Adjustable, single hand crank |
Adjustable |
| Rolls |
--- |
--- |
| Width, in. (mm) |
73 (1854) |
92.7 (2355) |
| Diameter, in. (mm) |
10 (254) |
10 (254) |
| Type of Material |
Urethane |
Urethane |
| Design |
Recessed cleat |
Recessed cleat |
| Speed |
664 rpm |
644 rpm |
| Drive |
Telescoping shaft |
Telescoping shaft |
| Windrow Width, in. (m) |
35 to 78 in. (.90 to 1.98 m) |
39 to 94 in. (1 to 2.38 m) |
| Tractor Hookup |
|
|
| Standard Hitch |
N/A |
N/A |
| Ball Joint Equal Angle Hitch |
Standard |
Standard |
| Rockshaft Swivel Hitch |
Optional |
Optional |
| Drawbar Swivel Hitch |
N/A |
N/A |
| Dimensions |
|
|
| Overall Width |
--- |
--- |
| Transport, ft.-in. (m) |
9 ft. 9 in. (3 m) |
11 ft. 6 in. (3.5 m) |
| With Optional Trailer, ft.-in. (m) |
N/A |
N/A |
| Overall Length |
--- |
--- |
| Conventional Transport, ft.-in. (m) |
20 ft 6 in. (6.3 m) |
20 ft. 6 in. (6.3 m) |
| With Optional Trailer, ft.-in. (m) |
N/A |
N/A |
| Weight |
--- |
--- |
| With Roll Conditioner, lb. (kg) |
5458 (2476) |
5685 (2579) |
| With Impeller Conditioner, lb. (kg) |
5238 (2376) |
5465 (2479) |
| Standard Tyres |
11L - 15 standard, 31x13.5L 15 optional |
11L-15 standard, 31 x 13.5L 15 optional |
| General |
|
|
| Are wrenches required for adjusting |
--- |
--- |
| Float |
No |
No |
| Skid Shoes |
No |
No |
| Roll Pressure |
Yes |
Yes |
| Roll Spacing |
Yes |
Yes |
| Header Tilt |
Yes |
Yes |
| Windrow Width |
No |
No |
| Swathboard |
No |
No |
| Impeller Conditioning Hood |
No |
No |
