| MANUFACTURER |
John Deere |
John Deere |
John Deere |
| MODEL |
625 Mower Conditioner |
630 Mower Conditioner |
635 Mower Conditioner |
| Power Requirements |
|
|
|
| PTO Speed |
540 |
540/1000 |
1000 |
| HP 540 rpm PTO, hp (kw) |
55-75 hp (41-56 kw) |
65-81 hp (48-60 kw) |
--- |
| HP 1000 rpm 1-3/8 in. PTO, hp (kw) |
--- |
65-150 hp (48-112 kw) |
90-150 hp (67-112 kw) |
| HP 1000 rpm 1-3/4 in. PTO, hp (kw) |
--- |
--- |
--- |
| Powerline Type |
Double-telescoping grob spline |
Double-telescoping grob spline |
Double-telescoping grob spline |
| Hydraulic Pressure Required |
2000 |
2000 |
2000 |
| Cutterbar |
|
|
|
| Type |
John Deere |
John Deere |
John Deere |
| Cutting Width, ft.-in. (m) |
8 ft. 2 in. |
9 ft. 9 in. |
11 ft. 6 in. |
| Cutting Height, in. (mm) |
1.1 to 3.8 in. (28 to 98 mm) w/out ext |
1.1 to 3.72in. (28 to 98 mm) w/out ext |
1.1 to 3.72in. (28 to 98 mm) w/out ext |
| Number of Disks |
5 |
6 |
7 |
| Number of Knives |
10 |
12 |
14 |
| Disk Speed, rpm |
2650 |
2650 |
2650 |
| Knife Tip Speed, mph |
191 |
191 |
191 |
| Disk Drive |
Gear |
Gear |
Gear |
| Lubrication |
Hi-Gard oil |
Hi-Gard oil |
Hi-Gard oil |
| Oil Reservoir Capacity |
6 qts (5.7 L) |
7.4 qts (7 L) |
8.5 qts (8 L) |
| Cutterbar Oil Check |
Drain plug |
Drain plug |
Drain plug |
| Cutterbar Angle |
Adjustable |
Adjustable |
Adjustable |
| Angle Adjustment |
Mechanical or hydraulic |
Mechanical or hydraulic |
Mechanical or hydraulic |
| Angle Range |
--- |
--- |
--- |
| Cutterbar Protection |
Shearhub |
Shearhub |
Shearhub |
| Adjustable Gauge Shoes |
Yes |
Yes |
Yes |
| Conditioner |
|
|
|
| Impeller |
--- |
--- |
--- |
| Width, in. (mm) |
55.2 in. (1402 mm) |
73 in. (1854 mm) |
92.7 in. (2355 mm) |
| Diameter, in. (mm) |
23.4 in. (594 mm) |
23.4 in. (594 mm) |
23.4 in. (594 mm) |
| Number of V-tines |
33 |
45 |
57 |
| Number of Speeds |
Two |
Two |
Two |
| Drive |
3-V powerband belt and sheaves |
3-V powerband belt and sheaves |
3-V powerband belt and sheaves |
| Conditioner Hood |
Infinite adjust, single hand crank |
Infinite adjust, single hand crank |
Infinite adjust, single hand crank |
| Rolls |
--- |
--- |
--- |
| Width, in. (mm) |
NA |
73 in. (1854 mm) |
92.7 in. (2355 mm) |
| Diameter, in. (mm) |
NA |
10 in. |
10 in. |
| Type of Material |
NA |
Urethane |
Urethane |
| Design |
NA |
Recessed cleat |
Recessed cleat |
| Speed |
NA |
664 rpm |
664 rpm |
| Drive |
NA |
Telescoping shaft |
Telescoping shaft |
| Windrow Width, in. (m) |
31 in. to 59 in. (.80 m to 1.5 m) |
35 in. to 78 in. (.90 m to 1.98 m) |
39 in. to 94 in. (1 m to 2.38 m) |
| Tractor Hookup |
|
|
|
| Standard Hitch |
Clevis |
Clevis |
Clevis |
| Ball Joint Equal Angle Hitch |
Option |
Option |
Option |
| Rockshaft Swivel Hitch |
--- |
Option |
Option |
| Drawbar Swivel Hitch |
--- |
NA |
NA |
| Dimensions |
|
|
|
| Overall Width |
--- |
--- |
--- |
| Transport, ft.-in. (m) |
8 ft. 2 in. (2.5 m) |
9 ft. 9 in. (3 m) |
11 ft. 6 in. (3.5 m) |
| With Optional Trailer, ft.-in. (m) |
--- |
--- |
--- |
| Overall Length |
--- |
--- |
--- |
| Conventional Transport, ft.-in. (m) |
20 ft. 6 in. (6.2 m) w/ equal angle tongue |
20 ft. 6 in. (6.2 m) w/ equal angle tongue |
20 ft. 6 in. (3.0 m) w/ equal angle tongue |
| With Optional Trailer, ft.-in. (m) |
--- |
--- |
--- |
| Weight |
--- |
--- |
--- |
| With Roll Conditioner, lb. (kg) |
NA |
4917 lb. (2230 kg) |
5144 lb. (2333 kg) |
| With Impeller Conditioner, lb. (kg) |
4470 lb (2027 kg) |
4696 lb. (2130 kg) |
4923 lb. (2233 kg) |
| Standard Tires |
11L-15 standard, 31x13.5L 15 optional |
11L-15 standard, 31x13.5L 15 optional |
11L-15 standard, 31x13.5L 15 optional |
| General |
|
|
|
| Are wrenches required for adjusting |
--- |
--- |
--- |
| Float |
No |
No |
No |
| Skid Shoes |
No |
No |
No |
| Roll Pressure |
N/A |
Yes |
Yes |
| Roll Spacing |
N/A |
Yes |
Yes |
| Header Tilt |
No |
No |
No |
| Windrow Width |
No |
No |
No |
| Swathboard |
N/A |
No |
No |
| Impeller Conditioning Hood |
No |
No |
No |
