Australia/New Zealand

 Home Products &
Equipment
 Parts &
Service
 Finance
Solutions
 Dealer
Information
 Info & Fun
Corner
 
Agriculture>Hay & Forage>Mower Conditioners>Specifications>900 Series
Agriculture
Hay & Forage
Mower Conditioners
Specifications
1345 & 1465
500 Series
600 Series
700 Series
800 Series
900 Series
Mounted - Front
Mounted - Rear
Mounted - Twin Rear
Golf & Turf
Grounds Care & Home Owners
Engine & Gen. Sets
Mower Selection
Merchandise Clothing & Gifts 
Toys
Government Sales
Used Equipment
Request Information
900 Series Mower Conditioners : Specifications


MANUFACTURER John Deere John Deere
MODEL 946 Mower-Conditioner 956 Mower-Conditioner
Power Requirements    
     PTO Speed 1000 rpm 1000 rpm
     Hp 540 rpm PTO N/A N/A
     Hp 1000 rpm 1-3/8 in. PTO 75 to 112 kW (100 to 150 hp) 75 to 112 kW (100 to 150 hp)
     Hp 1000 rpm 1-3/4 in. PTO 86 to 134 kW (115 to 180 hp) 86 to 134 kW (115 to 180 hp)
     Powerline Type Grobe Spline
     Hydraulic Pressure Required 2500 2500
Cutterbar    
     Type John Deere John Deere
     Cutting Width 4.00 m 4.50 m
     Cutting Height 16 to 118 mm 16 to 118 mm
     Number of Disks 8 9
     Number of Knives 16 18
     Disk Speed 2650 rpm 2650 rpm
     Disk Drive gear gear
     Lubrication Hy-Gard Oil Hy-Gard Oil
     Oil Reservoir Capacity 9.5 L 10.4 L
     Cutterbar Oil Check combination sight glass/drain plug
     Cutterbar Angle adjustable adjustable
     Angle Adjustment mechanical-standard / hydraulic-optional
     Angle Range 2 to 8 degrees 2 to 8 degrees
     Cutterbar Protection Shearhub Shearhub
     Adjustable Gauge Shoes 2 standard 2 standard
Conditioner    
          Width 268 mm 268 mm
          Diameter 594 mm 594 mm
          Number of V-tynes 72 72
          Number of Speeds 2 2
          Drive gear gear
          Conditioner Hood adjustable, single lever
          Width 268 mm 268 mm
          Diameter 254 mm 254 mm
          Type of Material Urethane urethane/ steel
          Design recessed cleat recessed cleat
          Speed 664 rpm 664 rpm
          Drive gear gear
     Windrow Width 1.02 to 2.54 m 1.02 to 2.54 m
Tractor Hookup    
     Standard Hitch N/A N/A
     Ball Joint Equal Angle Hitch N/A N/A
     Rockshaft Swivel Hitch standard standard
     Drawbar Swivel Hitch optional optional
Dimensions    
          Transport 4.00 m 4.50 m
          With Optional Trailer 3.00 m 3.00 m
          Conventional Transport 8.20 m 8.20 m
          With Optional Trailer 9.40 m 9.40 m
          With Roll Conditioner 2,980 kg 3,080 kg
          With Impeller Conditioner 2,955 kg 3,055 kg
     Standard Tyres 12.5L-15, 8PR 31x13.5-15, 8PR
General    
          Float no no
          Skid Shoes no no
          Roll Pressure no no
          Roll Spacing yes yes
          Header Tilt no no
          Windrow Width no no
          Swathboard no no
          Impeller Conditioning Hood no no

* Specifications subject to change.
Please contact your local dealer for more detailed information.

  Printer FriendlyPrinter Friendly   
Copyright © 1996-2008 Deere & Company.
All Rights Reserved.
Site Map | Privacy | Legal