Australia/New Zealand

 Home Products &
Equipment
 Parts &
Service
 Finance
Solutions
 Dealer
Information
 Info & Fun
Corner
 
Agriculture>Hay & Forage>Mower Conditioners>Specifications>700 Series
Agriculture
Hay & Forage
Mower Conditioners
Specifications
1345 & 1465
500 Series
600 Series
700 Series
800 Series
900 Series
Mounted - Front
Mounted - Rear
Mounted - Twin Rear
Golf & Turf
Grounds Care & Home Owners
Engine & Gen. Sets
Mower Selection
Merchandise Clothing & Gifts 
Toys
Government Sales
Used Equipment
Request Information
700 Series Mower Conditioners : Specifications


MANUFACTURER John Deere John Deere
MODEL 730 Mower Conditioner 735 Mower Conditioner
Power Requirements    
     PTO Speed 540 or 1000 rpm 1000 rpm
     Hp 540 rpm PTO 48 to 60 kW (65 to 81 hp) N/A
     Hp 1000 rpm 1-3/8 in. PTO 48 to 112 kW (65 to 150 hp) 69 to 112 kW (90 to 150 hp)
     Hp 1000 rpm 1-3/4 in. PTO N/A N/A
     Powerline Type Telescoping Grobe Spline (Swivel is tube
     Hydraulic Pressure Required 2000 psi 2000 PSI
Cutterbar    
     Type John Deere
     Cutting Width 3.00 m 3.50 m
     Cutting Height 22 to 94 mm 22 to 94 mm
     Number of Disks 6 7
     Number of Knives 12 14
     Disk Speed 2650 rpm 2650 rpm
     Disk Drive gear Gear
     Lubrication Hy-Gard Oil Hy-Guard Oil
     Oil Reservoir Capacity 7.6 L 8.5 L
     Cutterbar Oil Check Combination Check/Drain Plug
     Cutterbar Angle adjustable Adjustable
     Angle Adjustment mechanical-standard Mechanical
     Angle Range 2 to 8 degrees 2 to 8 degrees
     Cutterbar Protection Shearhub
     Adjustable Gauge Shoes 2 standard 2 Standard
Conditioner    
          Width 1,878 mm 2,355 mm
          Diameter 597 mm 597 mm
          Number of V-tines 45 57
          Number of Speeds 2 2
          Drive 3-V Powerband Belt and Sheaves
          Conditioner Hood Adjustable, single hand crank Adjustable
          Width 1,878 mm 2,355 mm
          Diameter 254 mm 254 mm
          Type of Material Urethane Urethane
          Design recessed cleat Recessed Cleat
          Speed 664 rpm 644 rpm
          Drive Telescoping Shaft
     Windrow Width 0.90 to 1.98 m 1.00 to 2.38 m
Tractor Hookup    
     Standard Hitch N/A N/A
     Ball Joint Equal Angle Hitch Standard Standard
     Rockshaft Swivel Hitch Optional Optional
     Drawbar Swivel Hitch N/A N/A
Dimensions    
          Transport 3.00 m 3.50 m
          With Optional Trailer N/A N/A
          Conventional Transport 6.3 m 6.3 m
          With Optional Trailer N/A N/A
          With Roll Conditioner 2,476 kg 2,579 kg
          With Impeller Conditioner 2,376 kg 2,479 kg
     Standard Tyres 11L - 15 11L-15
General    
          Float Yes Yes
          Skid Shoes No No
          Roll Pressure Yes Yes
          Roll Spacing Yes Yes
          Header Tilt Yes Yes
          Windrow Width No No
          Swathboard N/A N/A
          Impeller Conditioning Hood No No

* Specifications subject to change.
Please contact your local dealer for more detailed information.

  Printer FriendlyPrinter Friendly   
Copyright © 1996-2008 Deere & Company.
All Rights Reserved.
Site Map | Privacy | Legal