John Deere designed and manufactured operator´s cab provides simply the best in comfort, controls, ergonomics and all-round visibility. Unibody cab frame, four rubber mounts and sound absorbing material provide a low noise level.

• Reduced vibrations enhance operator´s comfort.
• Outstanding finishing and built quality.
• Pleasing family look.
• Low noise level.

Spacious, 1,57 m wide cab gives ample space even with a passenger in the cab. Tilt and telescopic steering column adapts perfectly to every operator. The cab is pressurized with integral heating and air conditioning standard (Climatrak™).

• Offers a comfortable, dust-free environment.
• Gives operator a good feeling.
• Enhances operator´s efficiency.

4 sq.m. of tinted glass all-around provide unobstructed view to the header equipment, to forage wagons on the left or right hand side and to the rear.

• Unobstructed view of header and spout to the sides and the rear enhances productivity.
• Reduces waste of forage.
• Improves operator´s team work.

A super comfort seat with a full range of adjustments, angle controls, backrest adjustments and cloth upholstery offers the operator perfect support and ultimate ride comfort during long working hours. A large and comfortable training seat is standard and complete with a large cool box. A field office option is available underneath the training seat cushion.

• Vertical shock dampener (3 positions),
• Lumbar adjustments (5 positions),
• Vertical and horizontal adjustment of the armrest console,
• Operator´s seat safety switch.

This unique John Deere CommandArm™ armrest console can be adjusted up/down, fore and aft to put the controls at the optimum location. The console follows seat adjustments. The CommandArm™ includes many functions, some of which are:

• Integrated multi function control lever for ground speed control;
• Three-position throttle buttons with indicators;
• Main switch for engaging/disengaging the cutterhead;
• Spout up/down adjustment;

This unique John Deere master control lever in the armrest console puts all header and spout controls right under the operator´s thumb. The lever is shaped to fit the hand naturally. The handrest can be adjusted for optimum position. The following functions can be controlled on the multi function lever:

• Ground speed forward/backWard infinitely from zero to maximum speed;
• Quick-stop button shuts off the header, feedrolls and cutterhead;
• Header up/down adjustment;
• Spout cap up/down movement and spout rotation;
• Header engaging/disengaging and feedroll reverser;
• Row guidance On/Off;
• Three programmable resume buttons enable selection of three modes with corresponding preset functions:

The cornerpost provides all the information on harvester operation at a glance, clear and easy to comprehend. Information is divided on three digital monitors. An optional Greenstar™ monitor is located on the cornerpost for easy reading and programming.

• Field proven cornerpost monitors provide reliable information.
• Same cornerpost monitor arrangement as on John Deere combines for easy training.
• No head turning required; view of the header is not impaired.

The overhead console comprises several controls. The control display in the middle of the overhead console gathers important controls. Some of the controls are:

• Lights control switches,
• ClimaTrak™ controls,
• Metal detector regulation including four lights indicating position of metal on the feedroll.
• Knife sharpening function.
• Stationary knife adjustment.
• Kernel processor rolls gap.
• Row guidance function.