|  |
Untitled Document
| MANUFACTURER |
John Deere |
| MODEL |
620F |
622F |
625F |
630F |
635F |
| Cutterbar |
| Type |
4-in. knife system with in-line gearbox |
| Cutterbar angle |
10 degrees |
| Cutterbar length, m (ft.) |
6.1 (20) |
6.7 (22) |
7.6 ( 25) |
9.2 (30) |
10.7 (35) |
| Flex cutterbar float range, mm (in.) |
152.4 (6) |
| Tilt adjustment |
17 degrees (located on feederhouse) |
| Knife sections |
Heavy-duty, over-serrated |
| Guards |
Forged steel, heat-treated |
| Backshaft speed, rpm |
520 |
| Knife speed, cycles/min. |
520 |
| Platform Auger |
| Diameter, mm (in.) |
660 (26) |
| Operating speed, rpm |
152, 135 (slow down), 170 (speedup) |
| Reel |
| Number for slats |
6 |
| Diameter, mm (in.) |
1067 (42) |
| Reel Controls |
| Height control |
Hydraulic |
| Speed control |
Hydraulic |
| Operating speeds, rpm |
6 to 44 |
| Hydraulics |
| Reel motor displacement (per revolution), L (cu. in.) |
--- |
| Reel drive system pressure, kPa (psi) |
14000 +/- 1000 (2000 +/- 150) |
Reel fore/aft stroke, mm
(in.) |
359 (14.1) |
| Dimensions |
| Cutting width, m (ft.) |
6.1 (20) |
6.7 (22) |
7.6 (25) |
9.14 (30) |
10.7 (35) |
| Gathering width, m (ft.) |
6.2 (20.1) |
6.8 (22.1) |
7.7 (25.1) |
9.18 (30.1) |
10.7 (35.1) |
| Overall width, m (ft.) |
7 (21.7) |
7.5 (23.7) |
8.5 (26.7) |
9.98 (31.7) |
11.2 (36.7) |
Approximate weight, kg
(lb.) |
1788 (3942) |
1912 (4215) |
2098 (4625) |
2559 (5641) |
3003 (6620) |
*Specifications subject to change. Please contact your local dealer for more detailed information.
|
