| MANUFACTURER |
MidWest Fabrication Pty Ltd |
| MODEL |
CropHawk
Series Draper Platforms |
| Platform Sizes: |
12.2 m (40
ft), 12.8 m (42 ft), 13.7 m (45 ft) |
| Platform Flotation: |
|
| Lateral Tilt |
+/- 4.5 Degrees |
| Pitch |
+/- 5 Degrees |
| Gauge Wheels |
Fluid
damped Macphersion Strut suspension with 750 mm travel and 30 degree caster.
Wheels are fitted with 9.00 x 15 implement tyres |
| Hydraulic System: |
|
| Reel Drive |
Via Combine
Harvester own system |
| Oil Reservoir |
70 litre
Draper Drive (Self contained system with manual speed controller) |
| Cutterbar: |
|
| Driven |
Single
"C" V belt |
| Twin Knife Drive |
Poly Chain
Belt (standard) |
| Speed |
610 Cycles
per minute |
| Stroke |
85 mm |
| Draper Belt: |
|
| Width - Side Belt |
Side Belts:
915mm (36") "V" guide |
| - Centre Belt |
Centre Belt
1500 mm (59") "V" guide |
| Speed - Side Belt |
0-660 rpm |
| - Centre Belt |
15% faster
than side belts |
| Speed Control |
Dual cab
control optional, independent feeder or outer belt control (standard) |
| Drive Rolls |
Vulcanized
rubber |
| Feed Drum: |
|
| Diameter |
355 mm
(14") |
| Fingers |
24 x 16 mm
diameter |
| Finger Pattern |
Double
Spiral Retracting |
| Finder Reach |
150 mm |
| Speed |
260 rpm |
| Reels: |
|
| Bat |
Two piece
reel |
| Pickup |
Two piece
reel |
| Weight: |
|
| CropHawk Bat Reel 40ft |
3,020 kg |
| CropHawk Pickup 40ft |
3,190 kg |
| CropHawk Bat Reel 42ft |
3,194 kg |
| CropHawk Pickup 42ft |
3,375 kg |
| Crophawk Bat Reel 45ft |
3,364 kg |
| CropHawk Pickup 45ft |
3,560 kg |
| Abrasive Crop: |
|
| Protection |
Stainless
steel under feed drum |
| |
Stainless
steel behind knife and under front of draper belt (load side) |
| Warranty: |
Warranty
and technical support available through MidWest Fabrication Pty Ltd & the
John Deere Dealer Network |
| |
12 months
on all components from initial use |
| |
Conditions apply after 12 months on all components from initial use |
