 |
| Header Equipment : 600F Series HydraFlex™ Specifications |
|
|
|
|
|
|
|  |
|  |
600R and 600F Series Cutterbar Platforms
FLEX PLATFORMS
|
Cutterbar:
| | Type
| 10 cm (4 in.) knife system with in-line gearbox
| | Cutterbar Angle
| 10 degrees
| | Cutterbar Length
| 5.5 m, 6.1 m, 6.7 m, 7.6 m, 9.2 m and 10.7 m
(18, 20, 22, 25, 30 and 35
ft.)
| | Flex Cutterbar Float Range
| 152.4 mm (6.0 in.)
| | Tilt Adjustment
| 17 degrees (located on feederhouse)
| | Knife Sections
| Heavy-duty, over-serrated
| | Guards
| Forged steel, heat-treated
| |
Knife Speed
| 520 cycles/min.
| |
Reel:
| | Number of Slats
| 6
| | Diameter
| 1,067 mm (42 in.)
| |
Reel Controls:
| | Height Controls
| Hydraulic
| | Speed Control
| Hydraulic
| | Operating Speeds
| 6-44 rpm
| |
Platform Auger:
| | Diameter
| 660 mm (26 in.)
| | Operating Speed
| 152 rpm
135 rpm (slow down)
170 rpm (speedup)
| |
Hydraulics:
| | Reel Motor Displacement (Per Revolution)
| 0.196 L (11.9 cu. in.)
| | Reel Drive System Pressure
| 14,000 (+ or -) 1,000 kPa (2,000 (+ or -) 150 psi)
| | Reel Fore/Aft Stroke
| 359 mm (14.1 in.)
|
Dimensions/Weights-Flex Platforms
|
Model
|
Cutting Width
|
Gathering Width
|
Overall Width
|
Approximate Weight
|
|---|
| 615F
| 4.6 m (15 ft.)
| 4.7 m (15.1 ft.)
| 5.4 m (16.7 ft.)
| 1,479 kg (3,261 lb.)
| | 618F
| 5.5 m (18 ft.)
| 5.6 m (18.1
ft.)
| 6.3 m (19.7 ft.)
| 1,664 kg (3,668 lb.)
| | 620F
| 6.1 m (20 ft.)
| 6.2 m (20.1 ft.)
| 7.0 m (21.7 ft.)
| 1,788 kg (3,942 lb.)
| | 622F
| 6.7 m (22 ft.)
| 6.8 m (22.1 ft.)
| 7.5 m (23.7 ft.)
| 1,912 kg (4,215 lb.)
| | 625F
| 7.6 m (25 ft.)
| 7.7 m (25.1 ft.)
| 8.5 m (26.7 ft.)
| 2,098 kg (4,625 lb.)
| | 630F
| 9.14 m (30 ft.)
| 9.18 m (30.1 ft.)
| 9.98 m (31.7 ft.)
| 2,407 kg (5,307 lb.)
| | 635F
| 10.7 m (35 ft.)
| 10.7 m (35.1 ft.)
| 11.2 m (36.7 ft.)
| 3,003 kg (6,620 lb.)
|
* Specifications subject to change.
Please contact your local dealer for more detailed information.
|
| |
|
|
