MFWD allows the most power and traction for any road or field condition.
A—AUTO MFWD Switch
B—Manual MFWD Switch
C—MFWD Indicator
MFWD can be engaged and disengaged in all gears (forward and reverse) during operation and under full load. There are three operating modes:
AUTO MFWD—Enter Auto mode by pressing AUTO MFWD switch (A) on armrest. While in Auto mode, LED in AUTO switch illuminates. MFWD indicator (C) illuminates when MFWD is engaged. Following is how MFWD operates in AUTO position:
MFWD automatically disengages when either brake pedal is pressed, at speeds above 23 km/h (14 mph) or steering angle is greater than selected value. To learn how to change steering angle press here.
MFWD automatically engages when speed falls below 19 km/h (12 mph), steering angle is below selected value (see above) or when BOTH brake pedals are depressed.
Manual MFWD—Enter Manual mode by pressing Manual MFWD switch (B). While in Manual mode, LED in Manual MWFD switch and MFWD indicator illuminate until disengaged. To disengage Manual mode, press illuminated Manual MFWD switch (B).
Manual MFWD is engaged when transmission is in Park.
Brake Assist—If both Manual and Auto Mode are deselected, MFWD will be in Brake Assist mode. In Brake Assist mode, MFWD will be off unless BOTH brake pedals are depressed at speeds above 5 km/h (3 mph).
IMPORTANT: Use AUTO MFWD or Brake Assist when transporting tractor.
NOTE: MFWD is not available for 9R tractors.